BUILD JOURNAL

Your first kit: where to begin

Unboxing, runners, cutting and assembly: a friendly guide to your first kit.

01 / Read the manual first

Check the runners against the parts list. Pay attention to left/right, front/back and repeated-step symbols. Handle clear parts with extra care.

02 / Cut in two stages

Make the first cut a little away from the part, then trim the remaining nub. Do not twist parts off by hand or use nippers as a lever.

03 / Take your time sanding

Start with a suitable grit and work toward a finer finish. Practice on spare runners before sanding dark plastic, and remove only a little material at a time.

04 / Build first, customize later

Focus on finishing the kit first. Decals, panel lining and matte finishes can wait until you know the materials. Some solvents can damage plastic; read the product instructions before use.

05 / After the build

Be gentle with joints when posing. Keep models away from direct sunlight, moisture and heat. Save the manual and spare parts for future maintenance.

← Back to build notes